A Brief Review and Its Incorporation with Bibliometric Analysis of Phase Change Materials for Thermal Energy Storage
DOI:
https://doi.org/10.30595/rice.v2i1.64Keywords:
cold chain, PCMs, bibliometric, thermal enegy storeAbstract
Reduction of Food Losses and Wastes (FLW) through the use of cold chain is one strategy applied in accelerating the SDGs goals of zero hunger. The application of Thermal Energy Storage (TES) based on PCM (Phase Change Material) is considered as one of best efforts for the simultaneous reduction of food losses and wastes, reduction of energy consumption as well as preserve the right temperature for food product. This paper presents the review of phase change material for thermal energy purposes and its bibliometric analysis. Bibliometric analysis on term of cold chain logistics show that there is correlation between cold chain and terms of optimization, vehicle routing, carbon emission, refrigeration, and phase change materials. The definition of TES and PCM, as well as the advantages of TES based on latent material are described in this paper. PCMs is classified into solid-solid, solid-liquid, solid-gas and liquid-gas based on its phase. The potential generation of gas and larger volume on solid-gas and liquid-gas PCMs limits the application of those two types of PCMs. PCMs is also classified according to the phase change temperature in which low, medium and high temperature PCMs. Organic, inorganic and composite based PCMs are the classification of PCMs based on the chemical composition. Among the types of PCMs, this paper present a deep review of paraffin based organic PCMs. The appearance of term of thermal conductivity in bibliometric analysis on term of organic phase change materials is due to organic PCMs commonly have low thermal conductivity
References
M. Calati, K. Hooman, and S. Mancin, “Thermal storage based on phase change materials (PCMs) for refrigerated transport and distribution applications along the cold chain: A review,” Int. J. Thermofluids, vol. 16, no. October, p. 100224, 2022, doi: 10.1016/j.ijft.2022.100224.
J. M. Boiteau and P. Pingali, “Can we agree on a food loss and waste definition? An assessment of definitional elements for a globally applicable framework,” Glob. Food Sec., vol. 37, no. July 2022, p. 100677, 2023, doi: 10.1016/j.gfs.2023.100677.
Bappenas, “Food Loss and Waste in Indonesia Supporting the Implementation of Circular Economy and Low Carbon Development,” pp. 1–111, 2021.
N. Lin, C. Li, D. Zhang, Y. Li, and J. Chen, “Emerging phase change cold storage materials derived from sodium sulfate decahydrate,” Energy, vol. 245, p. 123294, 2022, doi: 10.1016/j.energy.2022.123294.
Y. Sha, W. Hua, H. Cao, and X. Zhang, “Properties and encapsulation forms of phase change material and various types of cold storage box for cold chain logistics: A review,” J. Energy Storage, vol. 55, no. PA, p. 105426, 2022, doi: 10.1016/j.est.2022.105426.
S. Burgess, X. Wang, A. Rahbari, and M. Hangi, “Optimisation of a portable phase-change material (PCM) storage system for emerging cold-chain delivery applications,” J. Energy Storage, vol. 52, no. PB, p. 104855, 2022, doi: 10.1016/j.est.2022.104855.
M. Noro, R. M. Lazzarin, and F. Busato, “Solar cooling and heating plants: An energy and economic analysis of liquid sensible vs phase change material (PCM) heat storage,” Int. J. Refrig., vol. 39, pp. 104–116, 2014, doi: 10.1016/j.ijrefrig.2013.07.022.
T. Schröder, L. P. Lauven, T. Sowlati, and J. Geldermann, “Strategic planning of a multi-product wood-biorefinery production system,” J. Clean. Prod., vol. 211, pp. 1502–1516, 2019, doi: 10.1016/j.jclepro.2018.12.004.
E. Gao, Z. Zhang, Q. Deng, H. Jing, X. Wang, and X. Zhang, “Techno-economic and environmental analysis of low-GWP alternative refrigerants in cold storage unit under year-round working conditions,” Int. J. Refrig., vol. 134, no. July 2021, pp. 197–206, 2022, doi: 10.1016/j.ijrefrig.2021.11.007.
L. Y. Zhang, M. L. Tseng, C. H. Wang, C. Xiao, and T. Fei, “Low-carbon cold chain logistics using ribonucleic acid-ant colony optimization algorithm,” J. Clean. Prod., vol. 233, pp. 169–180, 2019, doi: 10.1016/j.jclepro.2019.05.306.
K. Li, D. Li, and D. Wu, “Carbon Transaction-Based Location-Routing- Inventory Optimization for Cold Chain Logistics,” Alexandria Eng. J., vol. 61, no. 10, pp. 7979–7986, 2022, doi: 10.1016/j.aej.2022.01.062.
L. Dash and P. Anna Mahanwar, “a Review on Organic Phase Change Materials and Their Applications,” Int. J. Eng. Appl. Sci. Technol., vol. 5, no. 9, pp. 268–284, 2021, doi: 10.33564/ijeast.2021.v05i09.045.
A. Khyad, H. Samrani, M. N. Bargach, and R. Tadili, “Energy storage with PCMs: Experimental analysis of paraffin’s phase change phenomenon & improvement of its properties,” J. Mater. Environ. Sci., vol. 7, no. 7, pp. 2551–2560, 2016.
S. Rashidi, M. Samimifar, M. H. Doranehgard, and L. K. B. Li, Organic Phase Change Materials. Elsevier Ltd., 2021.
N. Sarier and E. Onder, “Organic phase change materials and their textile applications: An overview,” Thermochim. Acta, vol. 540, pp. 7–60, 2012, doi: 10.1016/j.tca.2012.04.013.
C. Alkan, E. Günther, S. Hiebler, Ö. F. Ensari, and D. Kahraman, “Polyurethanes as solid-solid phase change materials for thermal energy storage,” Sol. Energy, vol. 86, no. 6, pp. 1761–1769, 2012, doi: 10.1016/j.solener.2012.03.012.
M. Wojda and T. M. Wójcik, “Novel solid - Solid phase change material based on polyethylene glycol and cellulose used for temperature stabilisation,” MATEC Web Conf., vol. 18, pp. 0–3, 2014, doi: 10.1051/matecconf/20141803009.
S. N. Gunasekara, R. Pan, J. N. Chiu, and V. Martin, “Polyols as phase change materials for surplus thermal energy storage,” Appl. Energy, vol. 162, pp. 1439–1452, 2016, doi: 10.1016/j.apenergy.2015.03.064.
A. Fallahi, G. Guldentops, M. Tao, S. Granados-Focil, and S. Van Dessel, “Review on solid-solid phase change materials for thermal energy storage: Molecular structure and thermal properties,” Appl. Therm. Eng., vol. 127, pp. 1427–1441, 2017, doi: 10.1016/j.applthermaleng.2017.08.161.
T. Feng, J. Ji, and X. Zhang, “Research progress of phase change cold energy storage materials used in cold chain logistics of aquatic products,” J. Energy Storage, vol. 60, no. October 2022, p. 106568, 2023, doi: 10.1016/j.est.2022.106568.
Z. Ling, J. Chen, T. Xu, X. Fang, X. Gao, and Z. Zhang, “Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model,” Energy Convers. Manag., vol. 102, pp. 202–208, 2015, doi: 10.1016/j.enconman.2014.11.040.
L. Fan and J. M. Khodadadi, “Thermal conductivity enhancement of phase change materials for thermal energy storage: A review,” Renew. Sustain. Energy Rev., vol. 15, no. 1, pp. 24–46, 2011, doi: 10.1016/j.rser.2010.08.007.
S. Kahwaji and M. A. White, “Organic Phase Change Materials for Thermal Energy Storage: Influence of Molecular Structure on Properties,” Molecules, vol. 26, pp. 1–18, 2021, doi: 10.1016/j.pmatsci.2014.03.005.
Z. Sunxi, Z. Xuelai, L. Sheng, L. Yuyang, and X. Xiaofeng, “Performance study on expand graphite/organic composite phase change material for cold thermal energy storage,” Energy Procedia, vol. 158, pp. 5305–5310, 2019, doi: 10.1016/j.egypro.2019.01.642.
N. Payam, F. Yashar, and J. Fatemeh, “Phase Change Material (PCM) as the Smart Heat-Storing Concept: A Brief Review,” Ann. Mar. Sci., vol. 6, no. 1, pp. 034–038, 2022, doi: 10.17352/ams.000029.
G. Zhang, Y. Sun, C. Wu, X. Yan, W. Zhao, and C. Peng, “Low-cost and highly thermally conductive lauric acid–paraffin–expanded graphite multifunctional composite phase change materials for quenching thermal runaway of lithium-ion battery,” Energy Reports, vol. 9, pp. 2538–2547, 2023, doi: 10.1016/j.egyr.2023.01.102.
Y. Li, Z. Fu, M. Xue, Z. Shao, Y. Li, and Q. Zhu, “Experimental study on preparation and thermal storage properties of expanded graphite/paraffin wax as a shape-stabilized phase change material,” Energy Reports, vol. 8, pp. 324–331, 2022, doi: 10.1016/j.egyr.2022.09.149.
N. H. Almousa et al., “Paraffin wax [as a phase changing material (Pcm)] based composites containing multi-walled carbon nanotubes for thermal energy storage (tes) development,” Crystals, vol. 11, no. 8, pp. 1–14, 2021, doi: 10.3390/cryst11080951.
I. Krupa, P. Sobolčiak, H. Abdelrazeq, M. Ouederni, and M. A. Al-Maadeed, “Natural aging of shape stabilized phase change materials based on paraffin wax,” Polym. Test., vol. 63, pp. 567–572, 2017, doi: 10.1016/j.polymertesting.2017.09.027.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Research In Chemical Engineering (RiCE)
This work is licensed under a Creative Commons Attribution 4.0 International License.
